IEC60068-2-75 Appendix D IK01 to IK06 Pendulum Impact Testing Machine
1. Introduction
The IK Pendulum Impact Testing Machine is an impact testing device for materials such as shells or glass. Pego make the device according to the requirements of IEC60068-2-75, GB/T2423.55, IEC62262, and GB/T20138 standards. It is mainly used for impact testing of non-metallic material specimens or products such as plastics, glass, and ceramics. It is a test instrument for evaluating the impact resistance of materials. According to the IK impact standards IEC62262 and GB/T20138, this test machine only contains five impact elements: IK07, IK08, IK09, IK10 and IK11. The hammer is released manually and the impact test sample (EUT) is dropped horizontally. This device is often used in lighting standards for impact tests on non-tempered glass. It mainly includes 4 hammers, a host, and bracket casters.
2. Standard
IEC60068-2-75 Environmental testing–Part 2-75: Tests – Test Eh: Hammer tests
IEC62262 Environment testing for electric and electronic products Part 2:Test methods-Test Eh:Hammer tests
3. Parameters
| Swing Pipe | Steel pipe 1 (Length: 1000mm, outer diameter: 15.9mm, thickness: 1.5mm) for energy 10J/20J/50J Steel pipe 2 (Length: 1000mm, outer diameter: 16mm, thickness: 0.5mm) for energy 5J Steel pipe 3 (Length: 1000mm, outer diameter: 9.0mm, thickness: 0.5mm) for energies not exceeding 2J |
| Impact angle | 0~900 |
| Falling height | 0-500mm adjustable, dial display |
| Lifting stroke | 200-1200mm |
| Impact hammers | Striking elements: 2J/0.5KG for IK07 test, 5J/1.7KG for IK08 test, 10J/5KG for IK09 test, 20J/5KG for IK10 test, 50J/10KG for IK11 test, made by steel |
| Hammer release method | Manual release |
| Mounting Fixtures | Flat mounting plate, adjustable angle 0-90°, equipped with M6 screw holes |
Note:
The standard configuration includes 0.5kg, 1.7kg and 5kg hammers for IK 07 to IK10 testing, 10KG hammer for 50J test is a optional device.
| Characteristics 0f Striking Elements |
| Energy/J | ≤1 ±10% | 2 ±5% | 5 ±5% | 10 ±5% | 20 ±5% | 50 ±5% |
| Equivalent mass±2%kg | 0.25(0.2) | 0.5 | 1.7 | 5 | 5 | 10 |
| Material | Nylon | steel |
| R/mm | 10 | 25 | 25 | 50 | 50 | 50 |
| D/mm | 18.5(20) | 35 | 60 | 80 | 100 | 125 |
| f/mm | 6.2(10) | 7 | 10 | 20 | 20 | 25 |
| r/mm | - | - | 6 | - | 10 | 17 |
| l/mm | Depends |
| Fall Height |
| Energy/J | 0.14 | 0.2 | (0.3) | 0.35 | (0.4) | 0.5 | 0.7 | 1 | 2 | 5 | 10 | 20 | 50 |
| Equivalent mass/kg | 0.25 | (0.2) | 0.25 | (0.2) | 0.25 | (0.2) | (0.2) | 0.25 | 0.25 | 0 .25 | 0.5 | 1.7 | 5 | 5 | 10 |
| Fall height±1%mm | 56 | (100) | 80 | (150) | 140 | (200) | (250) | 200 | 280 | 400 | 400 | 300 | 200 | 400 | 500 |
Degrees of protection against external mechanical impacts
| IK01 | IK02 | IK03 | IK04 | IK05 | IK06 | IK07 | IK08 | IK09 | IK10 |
| 0.14J | 0.2J | 0.35J | 0.5J | 0.7J | 1J | 2J | 5J | 10J | 20J |
4. Maintenance
4.1 The device is purely mechanical manufacturing, should keep regular maintenance, frequent lubrication of screw and bearing bits.
4.2 The device is strictly prohibited from no-load impact, that is, there should be an object under the striking element
4.3 Remove the striking elements when the device is in non-working state.
4.4 Inspect before using, make sure the apparatus placed level.
4.5 Working condition: 5~35℃ (temperature), 45~75% (R.H.)
5. Figures
Product Tags:
|
|
IEC60068-2-75 Appendix D IK01 to IK06 Pendulum Impact Testing Machine Images
|
